You are not logged in or registered. Please login or register to use the full functionality of this board...
Satellite Signal Reception Discussion Forum for Indian DTH Services, C Band, KU Band Reception
Raw way to make side lnb clamp for ku band dish - Printable Version

+- Satellite Signal Reception Discussion Forum for Indian DTH Services, C Band, KU Band Reception (http://dishtuning.com)
+-- Forum: Satellite Reception India Region (/Forum-Satellite-Reception-India-Region)
+--- Forum: Ku Band Reception (/Forum-Ku-Band-Reception)
+--- Thread: Raw way to make side lnb clamp for ku band dish (/Thread-Raw-way-to-make-side-lnb-clamp-for-ku-band-dish)

Raw way to make side lnb clamp for ku band dish - er. dhananjay - 07-15-2013 03:00 PM

here is the way to make side lnb clamp for ku band dish

1. take metal strip like this

[attachment=91]


2.then use pipe clips to fit lnb on metal strips, some of pipe clips are as

[attachment=87][attachment=88][attachment=89]

3. now fit metal strip onto dish at this point by means of screw

[attachment=90]

only take precaution that use thermacol or rubber between metal clip and LNB

RE: Raw way to make side lnb clamp for ku band dish - admin - 07-15-2013 08:11 PM

(07-15-2013 03:00 PM)er. dhananjay Wrote:  here is the way to make side lnb clamp for ku band dish

1. take metal strip like this




2.then use pipe clips to fit lnb on metal strips, some of pipe clips are as



3. now fit metal strip onto dish at this point by means of screw



only take precaution that use thermacol or rubber between metal clip and LNB

good idea dhananjay ...lot of members are looking for this kind of Jugaad!

RE: Raw way to make side lnb clamp for ku band dish - sathya - 07-18-2013 08:10 AM

without any critically clamp

RE: Raw way to make side lnb clamp for ku band dish - admin - 07-18-2013 06:29 PM

(07-18-2013 08:10 AM)sathya Wrote:  without any critically clamp

nice share sathya

RE: Raw way to make side lnb clamp for ku band dish - ramkumar - 04-23-2014 08:31 PM

(07-15-2013 03:00 PM)er. dhananjay Wrote:  here is the way to make side lnb clamp for ku band dish

1. take metal strip like this




2.then use pipe clips to fit lnb on metal strips, some of pipe clips are as



3. now fit metal strip onto dish at this point by means of screw



only take precaution that use thermacol or rubber between metal clip and LNB

good share