07-15-2013, 03:00 PM
here is the way to make side lnb clamp for ku band dish
1. take metal strip like this
[attachment=91]
2.then use pipe clips to fit lnb on metal strips, some of pipe clips are as
[attachment=87][attachment=88][attachment=89]
3. now fit metal strip onto dish at this point by means of screw
[attachment=90]
only take precaution that use thermacol or rubber between metal clip and LNB
1. take metal strip like this
[attachment=91]
2.then use pipe clips to fit lnb on metal strips, some of pipe clips are as
[attachment=87][attachment=88][attachment=89]
3. now fit metal strip onto dish at this point by means of screw
[attachment=90]
only take precaution that use thermacol or rubber between metal clip and LNB